The solar panel module robot curing line is particularly important in the curing of solar panels and after the frame is framed, but the previous manual handling and curing production efficiency is very low, and a new robot can be designed by running. The curing system of the solar panel is placed and taken out, and the control system composed of the touch screen automatically carries and controls the robot by using PROFIBUS communication, so that the deviation of the XY direction of the output and the feeding is less than 10 mm, and the maximum period is 57.24 s, which is less than one minute.
The solar panel module robot curing line is actually applied on site, and the robot handling solar panel system fully meets the requirements of position and production tempo. The curing of the solar panels is particularly important in the lamination and assembly of the frame. The curing chamber has special requirements for constant temperature and humidity.
The new automatic curing control system, including temperature and humidity control system and material handling system, realizes the control of the temperature and humidity control system actuator and the robot handling system actuator through the design of the PLC program. After the actual application in the field, the system meets the curing room. Temperature and humidity control and handling production tact requirements.