Safety knowledge and production requirements for battery string arrangement machine

- Dec 27, 2018-

The battery string typesetting machine specializes in the production of saw-type decker assembly lines, including dust collectors, lifting platforms and automatic board equipment. Advanced technology, saving production costs, saving two more labors than ordinary planking machines, saving thousands of yuan per day.

Battery stringer operation safety knowledge

The operator of the battery stringer must conduct equipment knowledge learning and safe operation training on the planking machine before going to work.

According to the production requirements of the multi-layer board typesetting machine, adjust the various mechanical parameters, and confirm that it is correct before starting the operation. Do not adjust the mechanical parameters while the equipment is in operation. When the machine is running, it is necessary to carefully observe whether the direction of rotation of the machine is correct. If it is found that there is an abnormality, the machine should be shut down and the power must be cut off. The operator of the machine must wear professional work clothes for mechanical operation.

Before starting the typesetting machine, carefully check whether the mechanical parts are in good condition, whether the lubrication is sufficient, and all tools and debris should not be placed on the machine. Do not disconnect the load while the machine is running. Do not open the transmission safety shield. After the completion, it is not possible to load the machine immediately, and the operation can only be performed after the machine is completely stopped. When the operator leaves for any reason, the power must be turned off.