The PV module EVA cutting laying machine can automatically cut and lay the entire roll of EVA or back sheet to the component according to customer's requirements.
Structural features of PV module EVA cutting laying machine
Photovoltaic module EVA cutting and laying machine automatic discharge material is automatically corrected by photoelectric correcting control system, full digital circuit control. The PV module EVA cutting machine is equipped with an automatic tensioning and wrinkle removal mechanism to ensure that the EVA surface is flat.
The automatic cutting material of the PV module EVA cutting and laying machine adopts the cylinder pressing and the servo motor is driven to ensure that the material is flush without deflection. The equipment double-drive automatic clamping and laying mechanism, the whole piece of cut EVA is laid on the glass.
The laying mechanism is controlled by a touch screen system, and the required parameters can be set according to different products. The equipment is equipped with an auxiliary feeding mechanism to facilitate manual feeding. The base of the frame is welded with iron square and iron plate, and the overall mechanism is stable.