The basic structure of the place mould machine

- Jul 11, 2019-

The place mould machine comprises a clamping frame, the left side of the upper surface of the clamping frame is a vertical frame, the bottom of the vertical frame is equipped with a rotating gear, and the right side wall of the driving vertical frame is equipped with a lifting drive motor, and the inner part of the vertical frame is installed Clamping mechanism.

 

The clamping mechanism includes a lower template and an upper template, and a telescopic partition is vertically embedded between the lower template and the upper template, and a left side of the telescopic partition is a moving feeding template, and a right side of the telescopic partition is provided with a discharging template, and the moving The center of the feed template and the discharge push template is connected with a movable pull rod, and the end of the movable pull rod is connected with a push-pull drive hydraulic cylinder.

 

The upper surface of the upper mold plate of the mold machine is equipped with a weight pressing template, and the rotating wheel is mounted on both sides of the side of the weight pressing template, the transmission chain is sleeved on the rotating wheel, and the other end of the transmission chain is sleeved with the transmission wire. Bar. The utility model can realize the azimuth adjustment operation of the clamping mechanism, and can conveniently perform the clamping and demolding operations.

 

https://www.chinasuperunion.com/