What factors should be considered when purchasing a glass loader?

- Jul 06, 2019-

When purchasing a glass loader, it is necessary to talk about the speed while satisfying the cutting accuracy. Since it is difficult to judge whether the maximum speed is reached, the software simulation function of the servo drive of the cutting machine can be used to check the speed of the motor. Whether it can reach the highest, compare the data of various types of equipment.

 

The cutting precision of the glass machine should be selected according to the actual needs of the machine. Firstly, it must be combined with the control of the cutter wheel, the running-in of the rack and pinion, the design is reasonable, the level of the control system, and then the measurement in the actual cutting, so that it can be comprehensive. Master the level of synchronization control between the cutting machine and the control system.

 

Regarding the automatic layout optimization function of the glass machine, it is necessary to apply to its own actual situation, can not pursue the 100% optimization rate, which can not be cut, the work efficiency is reduced, of course, it can not be completely optimized according to the manufacturer's specifications, and the special-shaped cutting graphics library More and more flexible, CAD and Solidworks software graphics files can be imported into the library, which makes it easy to work.

 

The fewer components on the upper glass machine, the simpler the design, the lower the probability of failure, the less wiring, and the ease of finding faults and replacing parts. It is also desirable to debug the status of each input and output signal on the display screen. Maintenance costs are an important factor that must be prioritized when purchasing equipment.

 

https://www.chinasuperunion.com/